Description
Unlock the full potential of your 3rd Gen Toyota Tacoma (2016+) with the Old Man Emu Complete Suspension Lift Kit, designed by ARB for improved performance, comfort, and reliability. More than just a lift, this system is carefully engineered to deliver a 2–3” increase in height, improved ride quality, and load-carrying ability—whether you’re commuting, exploring trails, or building the ultimate overland rig.
Initial evaluation of the new 2016 Tacoma was that the vehicle provided a balanced, compliant ride that gave the OME engineers a good platform for developing a range of suspension solutions. Consideration was given to the front geometry to maximize the lift while maintaining optimal levels of droop, down travel, and proper alignment.
This new generation of Tacoma has a different weight bias and total weight than the previous generation, so a full run of ride testing was undertaken to ensure the proper combination of solutions was found.
Front Suspension:
- Springs: Three spring options were chosen to cater for: No Bar, Bar or Winch only, and Bar + Winch vehicle setups. As the suspension design is the same as the previous model Tacoma, existing coil part numbers could be used, noting some slight change in application. Factory geometry allowed for a 2-inch lift while still maintaining an adequate level of droop.
- Struts: An extensive development and tuning project was undertaken to correctly match the ride quality to the spring rate and resulting in 2 front strut options depending on spring selection. A front trim packer is also available for fine-tuning front ride heights and correcting any left/ right lean.
Rear Suspension:
- Springs:
- Great emphasis was placed on ride comfort. OME Spring EL095R provides approximately 2-2.5″ of lift.
- Shock Absorbers: The rear shock absorber has been developed and tuned with particular attention to controlling the vehicle both with and without payloads. Numerous iterations of valving were tested in order to determine the best possible spring and shock absorber combination based on potential payload scenarios. As a result, the best possible configuration of ride comfort and vehicle control was achieved.
Key Features:
- 2–3” Lift Height – Extra clearance for bigger tires and rugged terrain.
- Tacoma-Specific Design – Springs and shocks tuned for the 3rd gen Tacoma chassis, weight balance, and suspension geometry.
- Enhanced Ride Comfort & Control – OME Nitrocharger Sport shocks absorb bumps with better stability on-road and off.
- Load-Carrying Options – Choose from different spring rates to match your build, from stock daily driver to fully-equipped overlander.
- Durably Built – Coils, leaf packs, and shocks tested in harsh Australian and North American conditions.
Kit Includes:
- Front Shocks- Choose from dropdown
- Front OME 90021 sport shocks – (softer valving)
- Front OME 90000 sport shocks – (firmer valving)
- Front coils: Choose from options:
- 2887 coils – Stock with no weight
- 2888 coils – with a bumper only or winch only
- 2886 coils – with a bumper and winch
- Rear Lift:
- Complete OME Dakar Rear Leaf Springs
- Leaf Spring Bushings
- New, longer u-bolts included
- Also Includes:
- Rear OME Nitrocharger Sport 60091 shocks
- Trim spacer for the driver’s side front coilover
- FK29 – Rear carrier bearing drop fit kit
Optional:
- Extra Leaf Spring D29XL or EL46XL (call for details)
- (2) Leaf spring center bolt UCB17 to be used for the extra leaf spring
Why Choose OME for the 2016+ Tacoma?
Generic lift kits give you height without balance—OME designs every spring and shock in the kit to work together specifically for the Tacoma platform. The result: reliable ground clearance, more controlled handling, and long-term comfort under every condition.
Perfect for:
- Tacoma overland builds with rooftop tents, bumpers, winches, or campers
- Trail rigs need durability and extra clearance
- Daily drivers who want an improved stance without sacrificing ride quality
